Syloid Ed 30 Tds Pdf Best -

Maintain a tip speed of 6 to 10 meters per second on a standard Cowles dissolver blade.

When incorporating SYLOID® ED 30 based on technical recommendations from a TDS, formulators should observe the following best practices: SYLOID® ED 30 Matting Agent by GRACE - Paint & Coatings

Applied in industrial metal coatings where high line speeds and high-temperature curing require a thermally stable matting agent.

| Property | Value / Range | Method / Note | | :--- | :--- | :--- | | | 7631-86-9, 8002-74-2 | | | Appearance | White, free-flowing powder | | | Average Particle Size | 5.0 - 6.0 μm | Malvern® analysis | | Pore Volume | 1.8 ml/g | Prior to surface treatment | | Oil Absorption | 300 g/100g | Measures high matting efficiency | | SiO₂ Content | 99.0% | Dry basis; very high purity | | Moisture Content | ≤ 3.5% | At 160°C | | pH | 6.0 - 8.5 | 5% aqueous suspension | | Wet Screen Residue | ≤ 0.01% | At > 25 μm; very fine dispersion | | Carbon Content | 6.0 - 9.0% | Confirms presence of organic treatment | | Bulk Density | 200 - 600 kg/m³ | | | Flash Point | > 180 °C (> 356 °F) | | | Auto-ignition Temp | 208 °C (406 °F) | | | Shelf Life | 12 months | When stored in a dry warehouse | Syloid Ed 30 Tds Pdf

In the world of industrial coatings, paints, and printing inks, the difference between a premium product and a mediocre one often comes down to the additives. Among the most critical of these additives are matting agents. For formulators seeking the perfect balance between surface smoothness, scratch resistance, and optical clarity, one name consistently rises to the top: .

According to typical , SYLOID ED 30 exhibits the following properties: Average Particle Size: 5.0 – 6.0 µm. Pore Volume (H₂O): 1.8 ml/g.

👇 Download the below: [Insert Link]

Searching for the is typically done by:

Syloid ED 30 offers high shear stability, withstands over-grinding without a drop in efficiency, and prevents hard settling during storage. It does not interfere with curing performance or interlayer adhesion, delivers a smooth, wear-resistant finish, and provides high transparency without causing haze or "fogging" in the dry film.

The TDS likely specifies a dispersion tip speed (e.g., 15-20 m/s). If you use a dissolver with a small blade and high RPM, you may generate heat above 50°C, which can degrade the organic treatment on the silica surface. The PDF will list a maximum temperature threshold. Maintain a tip speed of 6 to 10

It is designed to disperse quickly into liquid systems without forming hard sediments during storage. Technical Specifications at a Glance Value/Range Appearance White, free-flowing powder Average Particle Size 5.0 – 6.0 μm Pore Volume pH (5% aq. suspension) 6.0 – 8.5 Oil Adsorption ~300g/100g Solubility Insoluble in water Common Applications

[Your Name/Institution]