When the system is idle for long periods, install the protective plastic transport cap over the detector mechanism to prevent accidental impact damage. 7. Troubleshooting and Error Codes Error Symptom / Code Probable Root Cause Corrective Action Steps "Over-Range Error" Stylus deflected beyond mechanical safety limits. -axis immediately. Verify workpiece height profile changes. "Signal Low / No Contact" Stylus is suspended in the air; failure to touch down.
When searching, don't just search for "SV-400." Try searching for the Specific Kit Model Number . The SV-400 was often sold as a system including:
Periodically examine the diamond tip under a mitutoyo surftest sv400 user manual full
Improper installation can permanently damage the sensitive diamond stylus or cause measurement errors.
The SV-400 can spit out Ra, Rz, Ry, Rq, Rt, Sm, and S (among others). When the system is idle for long periods,
The SV-400 series is distinguished by its high-speed positioning and throughput, with X-axis drive speeds reaching . Key measurement features include:
Align the travel path of the X-axis drive unit parallel to the surface profile you want to measure. Lower the detector until the software's Z-axis level indicator is centered. Press . Ensure no external vibrations or bumps occur during the trace. 6. Understanding Parameters and Data Analysis -axis immediately
Check the printer connection or thermal paper supply. 6. Accessing the Official Manuals
Down to 0.0001 µm (0.1 nm) at its finest range.
The user manual is not just a list of parts; it is a technical guide that walks you through the measurement process. A typical workflow, as implied by the manual, includes:
), enter the correct nominal value into the software. The system will automatically recalculate the .