Tgc Bc901h Manual [HOT]

The indicator light on the main unit panel will reflect the selected time. The unit shuts off automatically when the timer expires. 4. Cleaning and Maintenance Instructions

: Displays a steady green light while the water heater is idling on standby. The light changes to a solid yellow or orange when a faucet opens and the main burner ignites. Step-by-Step Operating Instructions Initial System Activation

Occurs if power cuts out while a shower is running. Close the tap completely, wait 10 seconds, and restart. Continuous 60-minute cutoff

: Used to start or shut down the heater. When activated, the temperature display and operation indicators light up. tgc bc901h manual

A: Yes, if your model has an O/B terminal for reversing valve. Set parameter F10 (not shown in basic menu) to 1 for O terminal (cooling active) or 2 for B terminal (heating active).

A clogged filter restricts airflow, reduces heating efficiency, and can trigger safety shut-offs.

With the remote on and having priority, use the to increase or "-" button to decrease the temperature. The indicator light on the main unit panel

If an error occurs, try closing and re-opening the hot water tap. If the code persists, turn off the power supply for 10 seconds before restarting.

Use a damp cloth to clean the remote. Avoid abrasive cleaners or excess water. 4. Troubleshooting the TGC BC-90-1H

When multiple remotes are installed (e.g., in a kitchen and a bathroom), the ensures only one person controls the temperature to prevent accidental scalding. If the Priority light is flashing, it cannot be changed. Cleaning and Maintenance Instructions : Displays a steady

If you cannot locate your immediately, follow this generic safe setup procedure that applies to 90% of TGC BC901H models.

Turn on the shower faucet. The burner status light on the panel will change from green (standby) to amber/orange (combustion active). Running the Pre-Heating Recirculation Cycle