: Feed the multi-core connection cable through the rubber grommet on the rear panel. Strip back the wire jackets according to the system terminal block allocations.
Use a flathead screwdriver to gently pop the side tabs to access the internal buttons. 2. Wiring Connections
Issue: The door will not close, and the Yellow LED is permanently lit
The sensor comes with a pre-wired cable harness. Wire configurations typically follow this color standard, but always cross-reference with your specific terminal block markings: prosecure opti combi manual english
To ensure optimal performance and longevity, it's essential to operate and maintain your ProSecure Opti Combi correctly. Here's a guide to help you get the most out of your combi boiler:
: Used for the "safety curtain" to detect stationary or slow-moving objects in the door's threshold. LED Indicators : Active infrared detection (safety area triggered). : Microwave detection (motion area triggered). Flashing Red/Green
Before diving into the manual, let's take a look at some of the key features that make the ProSecure Opti Combi an exceptional combi boiler: : Feed the multi-core connection cable through the
Once installation and programming are complete, conduct a functional walk-test to verify optimal operation. LED Status Indicators Sensor is powered up and in standby mode.
Prosecure Opti Combi sensors are sophisticated combined radar and infrared systems used primarily for automatic sliding doors. They handle both motion detection (to open the door) and presence detection (to prevent the door from closing on someone). 🛠️ Prosecure Opti Combi: Quick Setup Guide
The terminal assignments for the output signals vary depending on the specific door operator model being used. The manual provides detailed tables for various dormakaba operators, including the series. Here's a guide to help you get the
After the sensor is mounted and wired, a basic function test must be performed before the door is put into service.
The Prosecure Opti Combi features highly flexible field settings and can be programmed using a remote control (sold separately, order number: 86991900). The LCD display shows the menu, allowing for precise adjustment.
: Use the red and black pushbuttons to navigate the menu and a potentiometer to adjust sensitivity. Red Button