is a versatile, high-power PWM (Pulse Width Modulation) and pulse signal generator. Unlike lower-powered signal generators, this "2K" model features a built-in MOS switch capable of driving loads like motors, LEDs, and solenoid valves directly up to
The is a high-power PWM and pulse signal generator capable of driving up to 8A loads (motors, LEDs, solenoids) directly. You can download the full technical paper and manual from Gotronik or Supereyes . ⚙️ Key Technical Specifications
1Hz to 150KHz (ideal for motor speed regulation, typically set to 20KHz). Frequency Accuracy: ~2%.
To help tailor this information to your specific project, tell me:
Use FREQ+/- or DUTY+/- to modify the highlighted parameter. Start: Press ON to start the pulse sequence. 5. Typical Application Scenarios Zk-pp2k Manual
The ZK-PP2K can be used as the core driver for a homemade PEMF (Pulsed Electromagnetic Field) therapy device. By connecting it to a power supply and a coil, and using the device's pulse timing features, you can generate the necessary magnetic fields for such therapeutic applications.
The ZK-PP2K module is a powerful, low-cost tool that puts high-power signal generation and control into the hands of anyone, from hobbyists to professionals. Its combination of dual operating modes, a high-current output, a user-friendly LCD interface, and power-down memory makes it an indispensable device for any electronics workbench. We hope this comprehensive manual helps you unlock the full potential of your ZK-PP2K and power your next project with precision and ease.
The does not work stand-alone for payroll. It must communicate with ZKTeco’s PC software: ZKTime 5.0 , BioTime 8.0 , or third-party software via SDK. The manual assumes you use ZKTime.
Set to 0.000 (within the 2-second SET sub-menu). Pulse Number: Set to ---- (Infinite). Execution: Tap ON to start the continuous sequence. is a versatile, high-power PWM (Pulse Width Modulation)
Understanding the technical boundaries of the ZK-PP2K ensures safe operation and prevents accidental component failure. Core Parameters
This comprehensive manual provides complete technical specifications, wiring configurations, operational steps, and application examples to help you optimize the ZK-PP2K module. Technical Specifications & Hardware Architecture
The device features a dual-mode interface toggled by holding the button for approximately 6 seconds.
Connects directly to the positive lead of your motor, LED array, or solenoid. ⚙️ Key Technical Specifications 1Hz to 150KHz (ideal
While it supports 8A, ensure your motor or load does not exceed this to avoid damaging the MOSFETs.
If the screen shows ---- in Pulse mode, it is set to infinity.
"You ignored the cardinal rule," Kael murmured. "You took it apart without looking at the map."