Resetting the counter without physically changing the waste ink pads will eventually lead to ink leaking inside your printer, damaging electronics. Use this tool only if you have removed and dried/replaced the pads.
To download the Canon Service Tool V5204, you can use the following link:
Beyond the primary ink absorber reset, the software has been reported to perform several other diagnostic and maintenance tasks:
Once your printer is verified to be in Service Mode, follow these steps to execute the counter reset: canon service tool v5204 download link
: V5204 is widely known for supporting a broad range of models, including the PRO-10, PRO-100 , and many G-series (like G2010) and MG-series printers. How to Use (Standard Procedure)
Usually $9–$15. It is a small price compared to buying a new printer.
Locate the tab inside the software interface. Find the section labeled Clear Ink Counter . Step 4: Set Absorber Value Resetting the counter without physically changing the waste
Not all version numbers are legitimate. A Canon-approved release roadmap shows no official version "V5105" was ever released after V5103, suggesting such labels may be fabricated. The legitimate version sequence you are looking for is V5204.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: On higher-end models (like the TM series), you can sometimes reset the maintenance tank usage directly through the service mode menu on the printer's LCD. How to Use (Standard Procedure) Usually $9–$15
It is an internal utility reserved for authorized service centers. Because of this, any publicly available "v5204 download link" originates from third-party hosting sites, forums, or independent tech blogs. Critical Safety Warnings
Canon Service Tool V5204 Download Link & Comprehensive Guide (2026 Updated)
: Resets the absorber counter, clears error codes like "Support Code 1700," and performs EEPROM diagnostics. Compatibility
$50–$90, depending on your region. For a $100 printer, this may not be economical, but for a $400 photo printer, it is worth it.
: Resets the internal waste ink counter to 0% after you have physically cleaned or replaced the ink pads.