Check the box for the USB port you identified (e.g., USB001 ) and click . 4. Verification
Your POS software expects a specific command set (usually ESC/POS) but the driver is using a Windows GDI-based driver. Solution:
1. The Printer Prints Random Symbols and Infinite Paper Feeds
Navigate to the folder containing the extracted files and locate the Setup.exe (or similarly named executable) file. Double-click the file to launch the installation wizard. driver printer panda prj80us top
. A configuration window will typically launch automatically. 3. Port Configuration (Crucial Step) Thermal printers like the
You are sending raw text, but the printer expects ESC/POS commands. Change your POS software’s "Printer Language" to "Text" or "Raw." Alternatively, reinstall the driver using the "Generic / Text Only" option.
Use the Windows 10 driver; it works without issues. Ensure you run the installer in Windows 8 compatibility mode if errors appear. Check the box for the USB port you identified (e
Unplug the USB cable, wait 5 seconds, and plug it back into a different USB port. If that fails, go to Printer Properties > Ports tab, change the checkmark from USB001 to USB002 or USB003, and click apply until the printer status changes back to online. 3. Receipts Are Cut Off Vertically
Point-of-sale (POS) systems depend on reliable, fast-responding receipt printers. The Panda PRJ80US Top model distinguishes itself with a top-loading paper mechanism and an 80 mm print width. However, its adoption has been limited by incomplete driver support across operating systems.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Solution: 1
(like QuickBooks or Lightspeed)
| Command | Hex Sequence | Function | |-------------------------|---------------------|-----------------------------------------| | Initialize printer | 1B 40 | Clear buffer, reset to power-on state | | Print and feed paper | 1B 64 n | Feed n lines | | Top-of-form alignment | 1D 46 00 | Set current position as top of receipt | | Cut paper | 1D 56 41 n | Partial cut (n=0) or full cut (n=1) | | Select double height | 1B 21 10 | Double height mode |
Uninstall the old driver, restart the computer, and install the latest driver again.