: Regularly inspect and clean the transparent film of the measurement window. Use the Niton Data Transfer (NDT) software to export data to a PC via the RS-232 port. Safety and Training Because the uses an X-ray tube, radiation safety is critical. Thermo Niton XLT 898: Portable Alloy Analyzer (X-Ray tube)
Comprehensive Guide to the Niton XLt 898 User Manual: Operating, Maintaining, and Maximizing Your XRF Analyzer
Press and hold the power button on the handle. The analyzer will perform a self-diagnostic check.
: Perform a "Cal Check" using the provided reference standard disc before daily testing. Taking a Measurement : Place the measurement window flush against the sample. Niton Xlt 898 User Manual
: Hold the On/Off button; enter the password on the touch screen to begin.
Potential causes include improper surface preparation, sample geometry, or a failed system check.
Depending on local and national regulations, operators may be required to wear thermoluminescent dosimeter (TLD) rings or badges to monitor cumulative radiation exposure. Regulatory Compliance : Regularly inspect and clean the transparent film
Disclaimer: This article provides a summary based on typical user guides. Always refer to the specific 500-644 user guide (or the manual provided with your unit) for safety protocols and operational instructions.
The internal memory stores up to 3,000 readings with full spectra. Data can be transferred to a PC using the Niton Data Transfer (NDT) software via RS-232 or Bluetooth. International Equipment Trading Ltd. 4. Applications is commonly used for: Positive Material Identification (PMI):
is a high-performance, handheld X-ray fluorescence (XRF) analyzer. It delivers rapid, non-destructive elemental composition data and precise alloy grade identification. This comprehensive manual serves as a definitive operational guide for technicians, safety officers, and quality control inspectors utilizing the Thermo Niton XLt 898 for scrap metal sorting, positive material identification (PMI), and failure analysis. 1. Unpacking and Standard Accessories Niton XLt 898 Go to product viewer dialog for this item. Thermo Niton XLT 898: Portable Alloy Analyzer (X-Ray
By following this comprehensive guide, users can get the most out of their Niton XLt 898 and ensure accurate and reliable analysis results.
The high-performance excitation source that replaces older isotope-based models, eliminating radioactive waste disposal headaches.
Enter your assigned four-digit user PIN code to log in to the main software menu. 4. Calibration and Standardization
Default mode for identifying metal alloy composition and grade verification.
with chemistry, Signature ID Store/Match, and Pass/Fail Sort. Data Storage: The internal memory can store up to 3,000–6,000 readings along with their X-ray spectra. Software Integration: NITON NDT© software