I can provide customized steps for your exact configuration. Share public link
If you used software to overclock your graphics card (e.g., MSI Afterburner, EVGA Precision X1), disabling it is straightforward.
CPU or GPU temperatures idling above 50°C or thermal throttling under load.
Disabling overclocking is a common way to lower system temperatures, improve stability, or return a used PC to its factory specifications. Depending on how the overclock was applied, you can disable it through Windows settings, specialized software, or the system BIOS. 1. Windows Power Settings (No BIOS Required) how to disable overclocking
To disable overclocking, you must address both hardware-level settings in your system's and any software-level adjustments made through tuning utilities
Turn off the power supply switch on the back of the case and unplug the power cable from the wall outlet.
Press Alt + Z to pull up the Nvidia overlay dashboard. Access Performance: Click on the Performance panel. I can provide customized steps for your exact configuration
Did the instability start after a recent ? Share public link
Processor overclocking is typically handled through your motherboard’s Unified Extensible Firmware Interface (UEFI) or Basic Input/Output System (BIOS). It can also be managed via manufacturer-specific software. Method 1: Resetting the Motherboard BIOS/UEFI (Recommended)
Locate the or Vcore setting and change it to Auto . Disabling overclocking is a common way to lower
This is the most common method.
Look at the bottom center of the interface for a (the Reset button).
Overclocking pushes your computer hardware beyond its factory-rated speed to extract extra performance. While this can boost frame rates in games or speed up rendering tasks, it also introduces significant trade-offs. Operating hardware above official specifications increases heat generation, elevates power consumption, and can cause system instability, random crashes, or data corruption.
Open your computer case side panel to expose the motherboard.
Press F10 (or the designated "Save and Exit" key) and select Yes to reboot your computer. Your CPU will now run at its native factory specifications. Method 2: Disabling Software-Based CPU Overclocks