Benss Fingerprint Reader Driver [cracked] -

This is a common issue with compact USB dongles due to aggressive Windows power-saving profiles.

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Device not detected | Missing or corrupted driver | Reinstall driver, try different USB port. | | “Driver not signed” error (Windows 10/11) | Old driver without WHQL signature | Temporarily disable driver signature enforcement or install in test mode. | | Fingerprint not scanning / LED off | Power management conflict | In Device Manager → USB Root Hub → Properties → Power Management → Uncheck “Allow the computer to turn off this device.” | | Blue screen on plugging in | Incompatible driver version | Boot into Safe Mode, uninstall driver, restore from System Restore point. | | SDK not finding device | Conflicting biometric service | Stop Windows Biometric Service ( services.msc → WbioSrvc → Stop). |

While Benss does not officially support Linux, some users have successfully gotten the device working on Ubuntu and other distributions. The key is the . Benss readers typically use USB IDs 04f3:0c26 or 04f3:0c28 (Elan Microelectronics Corp.). benss fingerprint reader driver

Benss fingerprint readers typically utilize chips manufactured by third-party semiconductor companies like or FocalTech . When searching for drivers manually, your device might register under names like: ELAN WBF Fingerprint Sensor FocalTech Fingerprint Device Goodix Fingerprint Device How to Download and Install the Benss Driver

To check for driver updates:

Right-click the Start button and select Device Manager .

Click , extract the downloaded .cab file, right-click the .inf file inside the folder, and select Install . Setting Up Windows Hello After Driver Installation This is a common issue with compact USB

) are designed as "Plug and Play" devices for .

If a driver labeled "ELAN Fingerprint", "Goodix", or "Benss" appears, check the box and click . Method 2: Manual Installation via Device Manager | | Fingerprint not scanning / LED off

Make sure to check the box that says if visible. Unplug the Benss USB finger reader from your machine. Restart your computer.