Canon G3400 Reset _hot_ Jun 2026

By following this guide, you have successfully performed a Canon G3400 reset. Your printer will now function as if it were brand new—saving you money and reducing electronic waste. Just remember to keep an eye on the bottom of your printer for future leaks.

The printer will print a page (D=000.0) indicating the counter is reset. Turn the printer off and then back on to exit Service Mode. 3. Resetting Ink Level Notifications

Release the button. The green light should flash and then stay solid. Clear the Counter : canon g3400 reset

the downloaded archive and run the executable application file as an Administrator.

Turn off the printer, wait 10 seconds, and turn it back on. The error should now be cleared. By following this guide, you have successfully performed

Watch the (orange light). It will begin to flash. Count the flashes carefully. Let it flash exactly 21 times .

Scroll down to the section, ensure it is set to Main , and click Set . The printer will print a page (D=000

Comprehensive Guide: How to Reset Canon G3400 Printer (Waste Ink & Factory Reset)

: Carefully extract the saturated pads using gloves. Wash them under warm water until clear, dry them completely, and reinstall them.

This is the most common reset for G3400.

To actually perform the reset, the software requires a "Reset Key" which must be purchased from their website.