Strands S68 Drill Press Manual Verified Direct
Drilling Capacity | : 20mm | suitable for both small and larger diameter holes in steel, aluminium and other materials. Spare parts & service - Machinery Scandinavia
The Strands S68 table can rotate 360 degrees around the column. Ensure the column clamp is completely locked before drilling to prevent tool deflection. Quill Return Spring Tension
Use the winding crank to raise or lower the table via the rack and pinion mechanism. Strands S68 Drill Press Manual
8 spindle speeds ranging from 100 to 2,900 or 3,020 RPM .
[ Speed Selection Levers ] | +--------v--------+ | Gearbox | +--------+--------+ | [ Spindle/Quill ] | [ Machine Table ] | [ Cast Iron Base ] Changing Gearbox Speeds Drilling Capacity | : 20mm | suitable for
Gear-driven drills have immense torque. Always bolt your vise to the table or use heavy-duty clamps. Remove the Key: Never leave the chuck key in the chuck.
The Strands S68 drill press is a masterpiece of mid-century industrial design. But without its manual, it’s a frustrating mystery. Whether you’re changing speeds for the first time or rebuilding the quill assembly, the original manual is your indispensable guide. Quill Return Spring Tension Use the winding crank
Because these machines are often decades old, finding a physical manual can be difficult. However, digital copies are available online.
| Specification | Value | | :--- | :--- | | | 32 mm (1.26 in) | | Drilling Capacity (Wood) | 50 mm (2.0 in) with auger bit | | Spindle Taper | MT2 or JT33 | | Speeds | 8 speeds (200 - 3000 RPM) | | Motor | 1.5 HP / 1.1 kW, 3-phase or 230V single-phase | | Column Diameter | 95 mm (3.74 in) | | Overall Height | 1850 mm (73 in) | | Weight | 180 kg (397 lbs) |
Locate the drain plug at the bottom of the gear housing. Drain the old oil completely while the machine is slightly warm. Replace the plug and refill through the top fill cap until the oil reaches the center of the sight glass. Daily and Weekly Maintenance
High-torque geared headstocks will instantly spin an unsecured vise or metal plate if the drill bit binds. Always clamp the workpiece or vise securely to the T-slots of the table.