The drone will execute the stunt and immediately return to a stable hover. Headless Mode Operation
If your drone drifts in any direction during a stable hover without joystick input, use the located adjacent to the right joystick to balance the flight:
: Avoid high winds and flying near power lines or people. ⚠️ Common Troubleshooting ultra drone x14.0 assault manual
Ensure propellers are clear of hair or clothing and that you are in an open area at least 1 meter away from uninvolved people. 2. Pairing (Syncing) the Drone Place the drone on a flat, level surface
Push both joysticks downward and outward (V-shape position) to arm the motors. Push the left stick gently upward to ascend. The drone will execute the stunt and immediately
: Red LEDs indicate the front (nose) of the drone; green or blue LEDs indicate the rear (tail).
The transmitter utilizes a standard Mode 2 configuration (Left Stick = Throttle/Yaw, Right Stick = Pitch/Roll). Left Control Stick : Controls Altitude (Ascend/Descend). : Red LEDs indicate the front (nose) of
Press the Backward Trim button repeatedly until stability is achieved. Drifting Left: Press the Right Trim button repeatedly. Drifting Right: Press the Left Trim button repeatedly. 6. Advanced Combat and Assault Maneuvers
Establish a clean, interference-free connection between the controller and the drone before firing up the motors. Binding the Transmitter
High-visibility directional lights located on the undercarriage of each motor arm (Red for front, Green for rear). 2. Pre-Flight Preparation and Battery Safety