While the software resets the counter , it doesn't magically clean the ink. If you reset the printer multiple times without physically cleaning or replacing the felt waste pads, ink may eventually leak out of the bottom of the unit.
The v3400 version is one of the last local, non-cloud-based versions of the tool, making it highly compatible with older Windows systems from XP up to Windows 10 (32-bit and 64-bit). It supports a wide range of models, including: iP Series: iP2700, iP4800, iP4900, and others. MP/MG Series: MP230, MP280, MG2140, MG5240, and more. iX and Pro Series: iX6500, Pro9000, and Pro9500. How to Use Service Tool v3400
To ensure the chip registered the change, click in the top section to print out the current data sheet. 🛑 When the Software Fails: Physical Chip Replacement
The phrase within this context usually refers to a workaround for the utility’s hardware protection checks or the necessity of modifying the physical ink cartridge chip to ensure the software communicates correctly with the printer. service tool v3400 download better chip
Use verified hardware (like KESSv2, KTAG, or FGTech Galletto) that includes licensed software or open-source alternatives (e.g., PCMhammer for certain ECUs).
While holding Power, release and press the Stop/Resume button 5 times (6 times for some MG models), then release both.
Analysis of Service Tool V3400 Utility and Reset Mechanisms for Canon Inkjet Printers While the software resets the counter , it
// V3400 Enhancement Script for STM32F1 CONNECT SWD FREQ=4000; READ_UID; IF (UID_BATCH > 0x320) THEN WRITE_REG RCC_CFGR = 0x0F400312; // Set PLL to 96MHz WRITE_REG FLASH_ACR = 0x00000032; // 2 wait states, prefetch on CALIBRATE_HSI; ENDIF; REBOOT_TARGET; VERIFY_CLOCK;
Downloading and upgrading to a better chip for your Service Tool V3400 is a relatively straightforward process. Here are the steps to follow:
Includes better compatibility with newer operating systems (Windows 10/11). Avoids false-positive malware detections. It supports a wide range of models, including:
No. This version is designed for older USB-based PIXMA models in the iP, MP, and MG series and is not compatible with modern Wi-Fi-focused devices.
: Supports numerous older Canon series, including iP (e.g., iP2700, iP4800), MP (e.g., MP230, MP280), MG (e.g., MG2120, MG5240), and iX series.
The printer will feed a blank sheet of paper and print a line of code confirming the counter is reset to D=000.0 .
The green power light should blink and then stay solid. Your printer is now in Service Mode. Step 3: Run the Tool
Release both buttons. If the power light stays solid green, you are in Service Mode. Run the Software Download and extract the Service Tool v3400 executable. Service Tool V3400.exe as an administrator. Reset the Counter Ink Absorber Counter section, select from the absorber pull-down menu.