Xycd60 Manual 📍

You're looking for a manual guide for the XyCD60!

Users can set a "Charging Time" (OP) to limit how long a battery remains connected to a charger, regardless of voltage. Serial Communication:

The unit features terminals for battery connection and charging/load connection.

Why readers should consult the manual

Ensure the load connected to the output does not exceed the relay's rated capacity (typically 10A–30A depending on the specific sub-model variant).

) and opens (cuts off load) when the voltage falls to the lower limit ( 3. Setting Parameters To configure the module, use the following button sequence: Enter Setting Mode: Long press the Switch Parameters: Short press to cycle through parameters: (upper limit), (lower limit), and (time control). Adjust Values: buttons to increase or decrease values. Save and Exit: Long press for 5 seconds to save and return to the main interface. Switch Modes: Long press the button for 5 seconds to toggle between Charging ( ) and Discharging ( 4. Advanced Functions

The module operates in two primary modes, which can be toggled by a long press of the button: xycd60 manual

Long-press the SET button to toggle between P-1 and P-2 modes.

(like the XY-CD63) to help you pick the best one for your needs.

Given the ambiguity of the model number, here is a final guide to help you find the correct information: You're looking for a manual guide for the XyCD60

Note: The module is powered from the input side, so input voltage must be present for the unit to operate.

Will you use the module to control a charger (P‑1) or to protect a battery from over‑discharge (P‑2)? This decision determines which terminals you will use.

This device is a popular choice for hobbyists and professionals alike for a wide range of DC systems, from solar power setups and backup battery banks to electric vehicles and DIY electronics projects. The information in this guide has been compiled from product manuals and technical specifications to serve as a central manual to get you started. Why readers should consult the manual Ensure the