Disco 240 Dmx Controller Manual Jun 2026

A chase is a dynamic sequence made by linking multiple programmed scenes together. You must program your static scenes before compiling a chase.

To help customize this guide for your specific setup, could you share a few details? Let me know:

: Select your desired bank using the Bank Up/Down buttons, then manually press Scene buttons 1–8 to change your room aesthetic instantly. Auto Mode (Speed & Fade Controlled)

: Select or program automated light sequences. disco 240 dmx controller manual

Press and hold the Program button for 3 seconds to exit. 4. Programming Chases (Sequences)

The Disco 240 operates under strict channel boundary rules. It divides its 240 available channels into 12 distinct fixture blocks. Specification 240 channels Fixture Capability Up to 12 fixtures Channels Per Fixture 20 channels max Chase Memory 12 distinct chases Steps Per Chase Up to 40 steps Output Protocol DMX-512 (3-pin XLR) Fixture DMX Address Mapping

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. A chase is a dynamic sequence made by

: Connect the DMX OUT of the first fixture to the DMX IN of the second, and so on.

The most common source of frustration for new users is incorrect DMX addressing. The Disco 240 uses a fixed channel allocation system.

Are you trying to program ?

The Disco 240 DMX controller is a powerful and user-friendly lighting control device that can help you create stunning lighting effects for your events. By following the guidelines outlined in this article, you'll be able to set up, program, and operate the device with ease. Whether you're a seasoned lighting professional or a beginner, the Disco 240 DMX controller manual provides a comprehensive guide to getting the most out of your device.

Press the buttons (1 to 12) for the lights you wish to position.

Toggles the 8 physical faders between Channels 1–8 (Page A) and Channels 9–16 (Page B) for a total of 16 directly accessible channels per fixture. Let me know: : Select your desired bank

If you encounter issues with your Disco 240 DMX controller, refer to the troubleshooting guide below: