English Spanian Russian

V2000-c - Rfid Access Control User Manual

Connect to positive lock terminal for Fail-Safe locks (Maglocks) COM (Common)

The V2000-C RFID Access Control is a standalone 125KHz EM card system supporting up to 1,000 users, offering adjustable door open times, and featuring a rugged plastic, non-waterproof design. While praised for its fast response time and versatility, users often report complex programming procedures. For official setup instructions, you can download the V2000-C User Manual directly from Obohands. programming NTIL V2000-c+ RFID Access Keypad - JustAnswer

To configure the unit, you must enter programming mode: * → [Master Code] → # (The yellow LED will light up, indicating you are in programming mode) . 4.2 Changing the Master Code Enter Programming Mode: * 123456 # Press 0 → [New 6-digit Master Code] → # Repeat [New 6-digit Master Code] → # Exit: * 4.3 Adding Users (Cards or PINs) Enter Programming Mode. Press 1 → [Read Cards] → # → * Add PIN Only: Enter Programming Mode. Press 1 → [Enter 4-6 digit PIN] → # → * 4.4 Deleting Users Delete a Card: Enter Programming Mode. Press 2 → [Read Card] → # → * Delete by PIN: Enter Programming Mode. Press 2 → [Enter PIN] → # → * 4.5 Setting Door Relay Time To adjust how long the door stays unlocked: Enter Programming Mode. Press 4 → [0-99 seconds] → # → * 5. Troubleshooting & Tips V2000-c Rfid Access Control User Manual

Drill a center hole through the mounting surface to cleanly route the connection cable harness.

Connect an exit push button to the designated input terminals. Pressing the button activates the relay without requiring credentials. Connect to positive lock terminal for Fail-Safe locks

The V2000-C is a widely used, standalone RFID access control keypad designed for secure and reliable entry management. This comprehensive guide serves as an extended user manual, detailing the technical specifications, wiring configurations, and step-by-step programming instructions for the device. 1. Product Overview and Technical Specifications

You now hold the equivalent of an advanced training course for the . This user manual has walked you from the screw terminals of the relay to the logic of anti-passback and multi-card open. programming NTIL V2000-c+ RFID Access Keypad - JustAnswer

1,000 users (Cards, PINs, or Card+PIN combinations) Card Reading Distance: 3–6 cm Compatible Card Type: EM or EM-compatible cards (125 kHz) Lock Output Load: Max 3A Alarm Output Load: Max 20A Operating Temperature: -10°C to 55°C Dimensions: Standard compact wall-mount chassis 2. Wiring and Installation Diagram