Xinje Plc Usb - Driver Install

To install the USB driver for a Xinje PLC, you typically need to install the specific programming software for your PLC series, which often includes the necessary drivers automatically 1. Download Required Software

: Visit the Xinje Download Center or regional sites like Xinje Malaysia to get the latest programming software for your specific series.

Install XC Pro software . The driver is typically located in C:\Program Files\Xinje\XCPro\Driver or similar.

You must temporarily disable Driver Signature Enforcement . Restart your PC while holding the Shift key. Go to Troubleshoot > Advanced options > Startup Settings > Restart . Upon reboot, press 7 or F7 to select "Disable driver signature enforcement." Try reinstalling the driver again. xinje plc usb driver install

This is the most common driver for direct USB connections.

For persistent issues not covered here, always check the official Xinje website for the most up-to-date software and manuals. Your automation projects are just a few clicks away.

Installing the Xinje PLC USB driver is a straightforward process when done correctly. By downloading the official XDPPro software, running the installer as an administrator, and carefully following the setup wizard, you will have a fully functional programming environment. The key to a successful installation is being meticulous about the installation path, having administrator rights, and following the post-installation configuration steps in XDPPro. To install the USB driver for a Xinje

Set the communication mode port type to (or USB if using a direct native USB protocol type option).

Installing a XINJE PLC USB driver is rarely a true plug-and-play experience. It is a systematic process that requires attention to PC administration rights, cable quality, and the specific series of your PLC (XC vs. XD).

The most straightforward way to get the USB driver is by letting the Xinje programming software handle it during its initial setup. Go to Troubleshoot > Advanced options > Startup

. If it is higher, you may need to manually change it in the Port Settings Advanced properties to avoid connection issues. Software Config: In your programming software, go to Option > Software Serial Port Config

[Start Menu] ➔ [Device Manager] ➔ [Right-click Unknown Device] ➔ [Update Driver] Press Windows Key + X and select .

Click the button and point the installer to the Driver folder located in Step 2. Ensure the checkbox for Include subfolders is marked.

Once finished, the device should appear under as "Xinje USB Serial Port (COMx)". 3. Configuring Software Connection (XCPro/XDPro)

: This indicates a driver mismatch or signature block. Re-run the installation after disabling driver signature enforcement.