Renolink supports a wide range of Renault and Dacia models. Here is a list of vehicles known to be compatible with key programming:
I assume you're asking about the diagnostic software (commonly used for Renault, Dacia, and some Nissan vehicles) and whether it supports key card programming as a feature.
Some advanced users flash modified firmware to the Renolink cable to unlock "erase key" functions, but this voids warranties and risks bricking your interface. For most users, buying a ($20-$50) is far simpler.
Plug the other end into the vehicle’s OBD2 diagnostic port (usually located in the center console, glovebox, or near the driver's steering column). Open the Renolink software on your computer. renolink key card programming
Warning: Incorrect programming can lock out existing keys. Read all steps before starting.
Step inside, insert the new key card, and press the Start button to verify that the engine starts smoothly without any immobilizer warnings. Troubleshooting Common Renolink Programming Failures
Ideal for older models up to roughly 2020 (Megane 2/3, Clio 3/4, Scenic 2/3). Renolink supports a wide range of Renault and Dacia models
A: Typically 4 to 5. The UCH has limited memory. You can delete old/unused keys using the "Erase lost keys" function if available.
The software is Windows-based and has been tested on Windows 10 LTSC 2019. It is also compatible with Windows 7, 8, and 11.
:
: Test both the engine start and the remote central locking functions to ensure the programming was successful. Common Issues & Risks Renaul Megane II . Key programming with Renolink
These are the recommended, stable hardware platforms. The red OBDLink SX USB is the most widely utilized interface for Renolink.