Aodelan Wtr2 User Manual [extra Quality] Jun 2026

Make sure the camera is not set to self-timer mode. 7. Maintenance and Safety Avoid using in extreme humidity or temperatures. Remove batteries if the unit is not used for a long time. Do not drop or shock the unit. By following this guide, you can fully utilize the Aodelan WTR2

Sets the time gap between consecutive shots.

To prevent interference from other photographers, match the wireless channels between your units. Long-press the (Channel) button on the transmitter. Use the arrow keys to select a channel from 01 to 99 . Press SET to confirm.

Time between the start of one shot and the next. Number of Exposures: Number of shots ($0$-99 or infinite). Audible Beeper: Toggles sound on/off during countdowns. 6. How to Use: Shooting Modes A. Simple Wireless Shutter Release Set the camera to single-shot mode. Press the shutter button on the transmitter. Half-press: Focuses. Full-press: Shoots. B. Wired Mode (Without Transmitter) The receiver (

Slides into your camera’s top shoe (functions as a cold mount for physical attachment only). aodelan wtr2 user manual

– I can guide you to search for a legitimate copy (e.g., on the manufacturer’s website, product listing on AliExpress or Amazon, or by contacting Aodelan directly).

However, getting the most out of its professional-grade features requires understanding the interface. This guide serves as your comprehensive manual for setting up and mastering the WTR-2. 1. What’s in the Box?

Used to navigate through the time-lapse settings (Delay, Long, Interval, Number). 4. Key Timer Functions (Intervalometer)

Settings: Set from 1 to 999 shots, or set to -- for an infinite loop until manually stopped. WTR2 (Repeat Interval / Beeper) Make sure the camera is not set to self-timer mode

Starts or pauses your programmed timer sequences.

The interval time must always be longer than your exposure time (LONG), plus the time your camera needs to process and save the image to the memory card. 4. N (Number of Shots)

Use the left and right arrow keys to navigate between .

Set both devices to the same wireless channel. Timer Function Explanations Remove batteries if the unit is not used for a long time

Use the arrows to select your desired channel number. Press SET to save.

Always power down your camera before connecting accessories.

Gives a two-second self-timer countdown before firing. Timer Mode: Accesses the intervalometer settings.

To configure automatic sequences, switch to mode using the Mode button. Use the left and right directional arrows to navigate through the five programmable parameters: