Gt005 Gps Tracker User Manual

Power on/off

Do not block the device with metal plates, engine blocks, or metallic tinting, as metal shields GPS signals. Plastic, wood, and fiberglass will not block the signal. 4. Understanding LED Indicator Status

Ensure you are appending the # symbol at the end of the text message string as required by the firmware protocol. Gt005 Gps Tracker User Manual

Install it under the dashboard, inside the rear bumper, or in the front panel to ensure a clear view of the sky for GPS signal reception. Wiring: Red Wire: +12V / 24V (Positive) Black Wire: Ground (Negative) Orange Wire: ACC Ignition Detection (Optional) Yellow Wire: Relay (Optional - for fuel cut-off) [1]. 4. Basic Setup (SMS Commands)

Monitor location via SMS or online platform [1]. Power on/off Do not block the device with

The Gt005 GPS tracker is a reliable and efficient device that provides accurate location tracking and a range of other features. This user manual has provided a comprehensive guide to getting started with your device, operating the device, and troubleshooting common issues. Whether you're using the Gt005 GPS tracker for fleet management, asset tracking, or personal tracking, this device is sure to meet your needs.

Before installation, verify the technical specifications of your device to ensure compatibility with your vehicle’s electrical system and local network bands. Technical Specifications 850 / 900 / 1800 / 1900 MHz (Quad-Band) GPRS: Class 12, TCP/IP built-in GSM Module GPS Module: High-sensitivity MTK chip GPS Channels: 20 channels Tracking Sensitivity: -159dBm Acquisition Sensitivity: -144dBm Positioning Accuracy: < 10 meters (open sky) Understanding LED Indicator Status Ensure you are appending

Note: Replace yourphonenumber , apnname , domain/IP , and port with your actual network and server details. Do not include spaces within the commands. 5. Mobile App and Web Platform Tracking

No SIM card detected, no cellular signal, or device is in deep sleep mode. 7. Troubleshooting Common Issues

(Adjust numeric values to match hardware.)