Epson L6460 Adjustment Program Here

Under the Port menu, select the specific USB port where your printer is connected (it will usually explicitly display "L6460" next to the port number). Do not leave this on "Auto Selection." Click . Step 3: Enter Particular Adjustment Mode

The program offers a suite of advanced tools that go far beyond standard driver settings. Key functions include:

Some antivirus programs flags resetters as false positives because they modify hardware registers. You may need to temporarily disable your antivirus software during execution. Step 2: Launch and Model Selection

Follow these steps carefully to reset your printer's internal counter: Step 1: Initialize the Software Epson L6460 Adjustment Program

This is the primary reason most users seek out the software. The printer's internal ink pads have a finite lifespan. When the counter hits its limit, the printer locks to prevent a leak. The program can reset this counter back to zero, unlocking the printer for continued use.

Forces a deep priming of the ink lines, useful after long periods of inactivity or after changing parts.

During routine head cleanings, borderless printing, and initial ink priming, a small amount of ink is pumped away from the printhead. This waste ink is directed into an internal porous sponge block known as the Waste Ink Pad. Under the Port menu, select the specific USB

If the points are at maximum capacity, ensure the boxes remain checked and click the button. A prompt will appear asking for confirmation. Click OK . Step 5: Power Cycle the Machine

Keep the boxes checked, and now click the button.

Click the button on the right side of the screen. The printer's internal ink pads have a finite lifespan

It slides out like an ink tank, requiring no software resets or technical workarounds.

This indicates the software cannot see the printer. Check your USB connection, make sure the printer is turned on, and ensure no other software (like the standard Epson Status Monitor) is actively using the printer port.

The is a piece of software used by Epson service technicians to reset these counters, perform deep cleaning cycles, and calibrate the print head. It is not intended for public sale but is widely available through third-party aggregator sites.