Redsail Cutting Plotter Software Installation -

Once installation is finished, plug in the USB cable and turn on the plotter.

Insert the Artcut Graphic Disc first, followed by the Software Disc. Device Setup: Within Artcut, go to File > Device Setup . Select Manufacturer: Choose Redsail .

: Keep the USB cable unplugged from the computer.

Ensure you are logged into your Windows computer with administrator privileges. Step 1: Installing the Redsail USB Driver The driver allows your computer to recognize the plotter.

Setting up a Redsail cutting plotter involves not just the mechanical assembly, but crucial software and driver installation to ensure smooth communication between your computer and the machine. Redsail plotters (such as the Go to product viewer dialog for this item. Go to product viewer dialog for this item. Go to product viewer dialog for this item. redsail cutting plotter software installation

A: Your baud rate mismatch is 90% likely. Also ensure the plotter is not in “Offline” mode (LCD should say “Online”).

Another application might be using the COM port. Restart the computer.

Disclaimer: The information provided is based on general Redsail installation processes, typically using ArtCut 2009 or similar software. For specific models, always consult the documentation provided with your machine.

: Using specialized plugins, you can send designs directly from CorelDraw to the plotter without exporting files to another program. Plotting Soft Landing : Advanced models like the Once installation is finished, plug in the USB

: Plug the USB cable from the plotter into your PC and turn the plotter on. Verify COM Port : Right-click the Windows Start menu and open Device Manager . Expand the Ports (COM & LPT) section.

Redsail plotters are compatible with several design and cutting programs. The software you received in the box can vary, but the following are common choices.

: USB-to-Serial cable or a standard USB printer cable (included with the machine).

Select as the manufacturer and select your specific model. Select Manufacturer: Choose Redsail

Note the COM port number assigned (e.g., COM3). You will need this for the software setup. 2. Choosing Your Design & Cutting Software

to bridge the connection between your computer and the plotter.

Run the installer, enter your software serial number, and complete the installation. Launch SignMaster and open the . Select Redsail as your brand and choose your model. Set the Connection Type to Direct COM Port or Windows Port .