Commax Dpra01 Installation Manual Link !free! | iPad |

Connect the opposite ends of the 2-wire line to the corresponding terminals on the outdoor station.

: For mounting instructions and step-by-step setup, you can view the Commax Intercom Installation Guide on Scribd Key Specifications : Talk with Door Station and Door Release button.

Position the bracket on the wall at an ergonomic height (recommended: 1.4m – 1.5m from the floor).

Once the wiring is complete and the system is powered on, perform the following tests: Connect the opposite ends of the 2-wire line

: An additional 2-wire connection is required for the door release mechanism, which may need its own dedicated power source depending on the specific door lock used.

Rotate the analog volume wheel on the side profile of the handset casing clockwise to increase gain. Technical Documentation and Resources Once the wiring is complete and the system

The is a classic, reliable 1-to-2 wire audio door phone system. It is designed for simple and effective communication, allowing a visitor at your door to contact up to two separate room stations inside a home or office. The system is known for its straightforward functionality, featuring door-to-room and room-to-room calling, as well as an electric door release function.

Locate the screw terminal block on the back panel of the DP-RA01. They are typically labeled as .