Get Your Digital Signature
Download App
Insert the remaining through the footboard corners into the side panels. Hand-turn the bolts to ensure proper alignment.
⚠️ Do not use power drills or electric drivers. Over-tightening can easily strip the threaded inserts built into the hardwood or crack the wood panels. Anatomy of the Parkland Crib
Position the rail so that its holes align with those on the headboard and footboard, then tighten the bolts using an Allen wrench. cdn.prod.website-files.com Baby Italia Crib Safety and Recall Information Guide
Loosen the long bolt by one turn. The barrel nut needs slack to find the bolt. Push the nut in at a slight angle, then straighten. Insert the remaining through the footboard corners into
Secure with from the inside of the crib.
Cylindrical metal inserts with a cross-thread hole, placed into pre-drilled interior slots to receive the bolts. 🪜 Step-by-Step Assembly Instructions
This is a critical step that many people rush. Carefully unpack the box and lay out every single component. Compare the parts you have against the inventory list in your manual. Over-tightening can easily strip the threaded inserts built
Insert the from the outside of the side panel into the headboard.
Repeat this process for the . Note: Do not fully tighten any bolts until the entire frame is connected. Leaving them slightly loose allows for necessary wiggle room during alignment. Step 2: Install the Mattress Support Frame
This is the most critical step for safety. The barrel nut needs slack to find the bolt
Assembling your Babi Italia Parkland Convertible Crib can be a stress-free experience if you follow these tips:
Before you pick up a single screwdriver, take five minutes to read through the entire instruction manual. Familiarizing yourself with the steps, diagrams, and parts involved will give you a solid mental map to follow. It's much easier than learning as you go.
One of the main selling points is this crib's "convertible" nature, designed to grow with your child.
Hand-tighten the bolts first to ensure they catch the threads properly. Repeat this process for the .