6765 Scatter File Install -

The official application used to read, format, and flash scatter-based firmware on MediaTek chipsets. Download the recommended version matching your device's security architecture via the SP Flash Tool Official Portal.

Extract your downloaded stock firmware into a dedicated folder on your desktop.

Once the process completes, a pop-up window featuring a checkmark will appear.

If the progress bar does not move, open Windows Device Manager. Connect the turned-off device and check if "MediaTek PreLoader USB VCOM" appears briefly. If it displays a yellow exclamation point, reinstall your drivers. 6765 scatter file install

Follow these steps carefully to load and execute the MT6765 scatter file installation. Step 1: Install the USB Drivers Extract your downloaded MTK USB Drivers package.

Once the progress bar reaches 100%, a green circle with a checkmark () will pop up on the screen. You can now safely disconnect your phone and power it on. Note that the first boot after flashing can take up to 10 minutes. Troubleshooting Common Errors

Select the file named MT6765_Android_scatter.txt (or similar variation depending on your firmware build) and click . The official application used to read, format, and

These parameters (names, start addresses, and sizes) are a precise match to your phone's original factory setup. This level of precision is why using the correct scatter file for your specific model is non-negotiable for a successful flash.

Necessary if your device features a secured bootloader requiring Auth file bypass. Step-by-Step Installation Guide Step 1: Install MediaTek USB Drivers Download the MediaTek USB VCOM drivers to your PC. Extract the archive file.

If you are looking to unbrick, update, or install custom firmware on a device powered by the MediaTek MT6765 chipset (commonly known as the Helio P35 or G35), the is your most important tool. Once the process completes, a pop-up window featuring

Locate the field. Click "Choose" and select MTK_AllInOne_DA.bin from the SP Flash Tool folder. Locate the Scatter-loading File field. Click "Choose".

A scatter file is a text document (.txt) used by MediaTek flashing tools. It acts as a database map for your device's storage.