The V1.1.2 release is considered a "sweet spot" for several reasons:
The ESP32 chip on the MKS DLC32 only supports 2.4GHz WiFi networks . It will not detect or connect to a 5GHz band. Make sure your router broadcasts a separate 2.4GHz band. Conclusion
Unlike generic installers, the designation points to a specific executable version (v1.12) that has been compiled for standalone execution. This version is famous in forums for three reasons: mks laser tool setup v112exe download better
Plug your MKS board into the computer using a high-quality USB cable.
Navigate to and search for the Makerbase MKS-DLC32 repository. Look for the "Tools" folder. The V1
:
Go to APP store to download MKSLaser APP, input the IP address. after installation to achieve offline control of the machine. Flying Bear Laser MKS Software Look for the "Tools" folder
To help tailor this setup, let me know you are using, or if you need help finding the latest official firmware file for your specific touchscreen size. Share public link
If your computer does not automatically recognize your MKS DLC32 board when plugged in via USB, you will need to install the CH340 USB-to-Serial driver . Makerbase usually bundles this driver within the same GitHub repository. Without it, the MKS Laser Tool will not detect your machine. Step 3: Setting Up and Using the Tool