Nalco 77225 Safety Data Sheet Upd ⚡ Limited

Due to its high alkalinity, immediate action is required in the event of exposure:

When requesting the SDS, be sure to specify:

The Globally Harmonized System (GHS) classifies Nalco 77225 based on its chemical alkalinity and concentration. Facility operators must familiarize themselves with the following profile:

This article is for informational purposes only. Always consult the specific SDS provided by Ecolab/Nalco for the exact batch of product in your possession, as formulations can change. 1. Product Identification and Hazards (Section 1 & 2) nalco 77225 safety data sheet upd

The SDS identifies NALCO 77225 as a substance that may cause irritation upon contact. The Global Harmonized System (GHS) classification usually labels this product under specific categories for skin and eye irritation. It is vital to check the "Signal Word" (typically "Warning" or "Danger") at the top of the SDS for the most recent safety update. 2. Composition and Ingredients

| Exposure Limit | Value | Source | |----------------|-------|--------| | Sodium Hydroxide (Ceiling) | 2 mg/m³ | OSHA PEL | | Proprietary Polymer | None established | N/A |

A Safety Data Sheet (formerly known as Material Safety Data Sheet, or MSDS) is a comprehensive document that provides critical information about a hazardous chemical or mixture. It is a cornerstone of workplace safety, legally required by occupational safety and health administrations (such as OSHA in the U.S. and ECHA in Europe) to be accessible to all employees who may be exposed to the chemical. The SDS for NALCO 77225 is the authoritative source for information on: Due to its high alkalinity, immediate action is

: Category 2 (Causes skin irritation) or Category 1 depending on system concentration. Direct exposure causes moderate to severe irritation, localized redness, and potential chemical burns if left untreated.

: Nalco 77225 is an alkaline liquid solution. Under standard chemical manufacturing rules, its precise active polymer and phosphate percentages are listed as proprietary information.

Do not induce vomiting. Rinse the mouth with water and contact a poison control center immediately. 4. Fire-Fighting and Accidental Release It is vital to check the "Signal Word"

The primary hazardous component, potassium hydroxide, is a strong base that causes immediate tissue damage upon contact. Chronic exposure to mists may lead to respiratory irritation.

Wear tight-fitting chemical splash goggles or a full-face shield to shield against direct alkaline splattering.

Flush immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.

Wash the affected area with soap and water. Remove contaminated clothing.

Industrial facilities must enforce engineering controls and issue targeted PPE to completely mitigate risk during direct chemical transfers, dosing, or sampling.