Tronxy Xy-2 Pro: Firmware Update [top]

If you updated to Marlin, run a PID loop calibration for both the hotend and the heated bed to ensure stable temperature management. Troubleshooting Common Issues

A firmware update acts as an operating system upgrade for your 3D printer. It optimizes how the mainboard communicates with the stepper motors, heating elements, and sensors.

Go to Menu > Info . The firmware date should be newer. tronxy xy-2 pro firmware update

The firmware updated successfully, but the UI assets folder did not flash. Ensure the graphical folders ( ui or code ) were copied properly to the root of the card and re-flash. Issue 3: Inverted Axis Movements or Inverted Endstops

If you are trying to compile via Arduino/VS Code and get this error, check your USB cable. Many printer cables are power-only and do not transmit data. Ensure you are using a data-sync cable. If you updated to Marlin, run a PID

: Tronxy's newer firmware versions have sometimes changed the naming convention for the update file. If the above method doesn't work with a .cbd file, you may need to use the STM32 Flash Loader to upload the firmware.bin file directly via USB. The official GitHub page provides a FAQ for common compilation and update errors.

Upgrading allows you to utilize advanced tuning features like Linear Advance (which reduces corner bloating) and Babystepping (which lets you micro-adjust the Z-axis height in real-time during the first layer). Go to Menu > Info

Navigate to the printer menu and select "Restore Failsafe" or "Reset EEPROM", then click "Store Settings". Alternatively, send the G-code commands M502 followed by M500 via a USB terminal.